Controls
#
DIM MODE
–to select different brightness for the display
screen : DIM 1, DIM 2, DIM 3 or DIM OFF.
$
# OPEN
–to open the tape deck door.
%
PROGRAM
for CD ................. to programme disc tracks.
for Tuner ............. to programme preset radio
stations.
for Clock ............ to select 12- or 24-hour clock
mode.
^
MAX SOUND (MAX)
–to activate or deactivate the optimal mix of
various sound features.
&
n
–to connect headphones.
*
VOLUME (VOLUME +/-)
–to increase or decrease the volume .
(
NEWS
– to hear News automatically.
)
RDS
–to select RDS information.
¡
Disc tray
™
OPEN•CLOSE
–to open or close the disc tray.
£
DISC CHANGE
–to change disc(s).
Display screen
–to view the current status of the system.
REPEAT
–to playback track(s)/disc(s)/programme
repeatedly.
§
SLEEP
–to activate/deactivate or set the sleep timer.
SHUFFLE
–to playback all a vailable discs and their tracks/
programme in random order.
•
B
–to switch the system to standby mode.
–to switch the system to Eco Power standby
mode.
Notes for remote control:
– First, select the source you wish to
control by pressing one of the source select
keys on the remote control (CD or TUNER,
for example).
– Then select the desired function (
É
,
í
,
ë
, for example).
24
25
27
Important notes for users in the
U.K.
Mains plug
This apparatus is fitted with an approved 13
Amp plug. To change a fuse in this type of plug
proceed as follows:
1
Remove fuse cover and fuse.
2
Fix new fuse which should be a BS1362 5 Amp,
A.S.T.A. or BSI approved type.
3
Ref it the fuse cover.
If the fitted plug is not suitable for your socket
outlets, it should be cut off and an appropriate
plug fitted in its place.
If the mains plug contains a fuse, this should
have a value of 5 Amp. If a plug without a fuse
is used, the fuse at the distribution board
should not be greater than 5 Amp.
Note: These vered plug must be disposed of to
avoid a possible shock hazard should it be
inserted into a 13 Amp socket else where.
How to connect a plug
The wires in the mains lead are coloured with
the following code: blue = neutral (N),
brown = live (L).
¶ As these colours ma y not cor respond with the
colour mar kings identifying the ter minals in
your plug, proceed as follows:
– Connect the blue wire to the terminal
marked N or coloured black.
– Connect the brown wire to the terminal
marked L or coloured red.
– Do not connect either wire to the earth
terminal in the plug, marked E (or e) or
coloured green (or green and yellow).
Before replacing the plug cover, make cer tain
that the cord grip is clamped over the sheath
of the lead - not simply over the two wires.
Copyright in the U.K.
Recording and playback of material may
require consent. See Copyright Act 1956 and
The Performer’s Protection Acts 1958 to 1972.
Norge
Typeskilt finnes på apparatens underside.
Observer: Nettbryteren er sekundert
innkoplet. Den innebygde netdelen er
derfor ikke frakoplet nettet så lenge
apparatet er tilsluttet nettkontakten.
For å redusere faren for brann eller elektrisk
støt, skal apparatet ikke utsettes for regn eller
fuktighet.
Italia
DICHIARAZIONE DI CONFORMITA’
Si dichiara che l’apparecchio FW-C717 Philips
risponde alle prescrizioni dell’art. 2 comma 1
del D.M. 28 Agosto 1995 n. 548.
Fatto a Eindhoven
Philips Consumer Electronics
Philips, Glaslaan 2
5616 JB Eindhoven, The Netherlands
CAUTION
Use of controls or adjustments or
performance of procedures other than
herein may result in hazardous
radiation exposure or other unsafe
operation.
To Next Page
Loading...
