Philips GoGear SA2VBE - Listen to music; Navigate inside a music track; Play music from a filtered selection; Find your music

16
Format VIBE (erase all music
and data)
Philips Songbird has a Format feature that you
can use to format VIBE and erase all your les
from the internal memory.
Caution
The following procedure erases all your les •
that are stored on VIBE.
1 Install Philips Songbird on your computer
(see chapter Install software), and then
launch the program.
2 In the Philips Songbird player pane, click
on VIBE.
3 In the library pane, click on the tab called
Tools.
4 In the tools pane, click on Format device.
5 Follow the on-screen instructions to
complete the repair procedure.
Repair VIBE (restore factory
settings)
Philips Songbird has a repair feature that you
can use to restore VIBE to the factory settings.
Before you proceed, back up your les that are
stored on VIBE if possible.
Caution
The following procedure erases all your les •
that are stored on VIBE, and restores the
factory settings.
1 Install Philips Songbird on your computer
(see chapter Install software), and then
launch the program.
2 In the Philips Songbird menu bar (at the
top), click on the Tools pull-down menu
and then select Repair My VIBE.
3 Follow the on-screen instructions to
complete the repair procedure.
EN