Philips GoGear SA2VBE - Radio; Listen to recordings; Upload your recordings to a computer

21
Play a preset radio station
1 While in mode, select preset.
2 Press or to change to another
preset.
3 To search for the next stronger signal,
press and hold or for 2 seconds.
To return to the main menu, press •
and hold for 2 seconds.
Note
To play preset radio stations, you rst have to •
store radio stations under presets.
10 Radio
Listen to FM radio
1 From the main menu, select to enter
radio mode.
The earphones cable acts as FM »
antenna.
Tip
Radio play stops when you switch to another •
mode or when you turn off VIBE.
Manually tune a radio station
While in mode, you can manually tune to a
radio station:
1 To search for the next stronger signal,
press and hold / .
2 To ne tune the frequency, briey press
/ .
Auto-tune radio station
presets
The auto-tune feature of VIBE helps you nd
radio stations and save them under the preset
numbers.
1 While in mode with the earphones
connected, select a preset.
2 Press and then select [Auto tune].
If prompted, select • [Yes] to conrm.
The radio automatically tunes radio »
stations and saves the frequencies to
presets. There are 20 presets available.
To stop auto tuning, press • .
To return to the main menu, press •
and hold for 2 seconds.
English
EN