What to do if the brew group cannot be inserted in my Philips HD8826?
If the brew group cannot be inserted, make sure that the brew group is in the off position. If that doesn't work, insert the drip tray and the coffee grounds drawer, close the service door, and turn on the machine without inserting the brew group. This will move the gearmotor back to the correct position. Then, turn off the machine and reinsert the brew group.
General| Appliance placement | Countertop |
|---|---|
| Product type | Espresso machine |
| Water tank capacity | 1.8 L |
| Maximum operating pressure | 15 bar |
| Coffee beans capacity | 250 g |
| Built-in grinder | Yes |
| Adjustable grinder settings | Yes |
| Number of grinder settings | 5 |
| Milk tank | No |
| Hot water system | Yes |
| Adjustable coffee strength | Yes |
| Adjustable coffee volume | Yes |
| Adjustable temperature | Yes |
| Pre-brew aroma control | Yes |
| Self-cleaning | Yes |
| Removable brewing unit | Yes |
| Removable water tank | Yes |
| Cord length | 0.8 m |
| Colour | Black |
| Milk Frother | No |
| Programmable | Yes |
| Removable Drip Tray | Yes |
| Auto Shut-off | Yes |
| Width | 21 cm |
| Depth | 43 cm |
To Next Page
