- 2-5 -
DVD PLAYER PROGRAM DOWNLOAD METHOD
1. DVD player without CD-RW option
1-1) Download the DVD program from your PC as following procedure
ACTION FLD display
• Plug the Power cord out
• Connect the Fixture for download
(Refer to Deck Mechanism Adjustment)
• Execute the prgram for download(Flashrom.exe)
• Open the DVD program file
• Plug the Power cord in
• Press the MENU Key on the Remote controller FLASH
• Select Down icon with injector icon then start
download from the P.C
■ In status of download
• Erased the Flash memory FLASH ERA
• Written the Flash memory FLASH XX(XX: Program counter)
• Verified the Flash memory FLASH XX(XX: Program counter)
• Completed the download FINISHED
■ If an error was occurred during download, do not unplug the Power cord, and retry the download
form the P.C until it is completed.
2. DVD player with CD-RW option(for models using C-CUBE
MPEG chip, marking on the IC is ZIVA)
2-1) Make the DVD program upgrade Disc as following procedure
*Recommended S/W: adaptec Easy CD Creater
*use file format: ISO9660
• Rename the souce file from the P.C to FIRMWARE.BIN
(Ex, If Source file is lg_a3_korea.bin, rename to FIRMWARE.BIN)
• Format the CD-RW Disc as below Make the Folder name to UPGRSADE.DVD under root folder
(Ex, UPGRADE.DVD)
• Download the source file renamed to FIRMWARE.BIN in the folder
(Ex, UPGRADE.DVD FIRMWARE.BIN)
W
W W
To Next Page
