To Next PageTo Next Page
Need help?Do you have a question about the Philips HTS3100 Series and is the answer not in the manual?
General| Type | Home Theater System |
|---|---|
| Channels | 5.1 |
| DVD Player | Yes |
| USB Port | Yes |
| Audio Playback Formats | MP3, WMA |
| Picture Playback Formats | JPEG |
| Surround Sound | Dolby Digital, DTS |
| DVD Region Code | 2 |
| Progressive Scan | Yes |
| Component Video Output | Yes |
| Composite Video Output | Yes |
| SCART Output | 1 |
| Digital Audio Output (Coaxial) | Yes |
| Analogue Audio Input | Yes |
| FM Radio | Yes |
| Video Playback Formats | DivX, MPEG2 |
Covers mains voltage, power consumption, dimensions, and standby power.
Details FM/MW tuner characteristics and amplifier performance metrics.
Outlines specifications for CD, VCD, and DVD playback features.
Describes the test equipment and setup for FM and AM tuner measurements.
Details the measurement setups for CD and tape recorder functions.
Lists required service tools and specific test discs for diagnostics.
Provides guidelines for dismounting, mounting, and precautions for chip components.
Explains ESD sensitivity and necessary precautions for handling components.
Highlights warnings regarding invisible laser radiation and leakage current tests.
Details how to identify and use lead-free solder for repairs.
Outlines rules and procedures for soldering with lead-free alloys.
Provides step-by-step instructions for replacing the defective loader.
Explains the ESD protection mechanism for the laser diode and its removal.
Steps to remove the DVD loader tray cover.
Instructions for removing the front board, PSU module, and DVD loader.
Steps for dismantling the tuner module and mono board.
Procedure to remove the amplifier module board.
Illustrates the service position for the front board assembly.
Shows the service position for the mono board.
Displays the service position for the amplifier board.
Details display test patterns to check driving circuits and connections.
Covers reprogramming DVD version, checking software, and burning firmware.
Instructions for firmware upgrade, version check, and trade mode activation/deactivation.
Shows the overall block diagram of the centre unit components.
Illustrates the wiring connections between system components.
Shows the circuit diagram and PWB layout for the front display board.
Details the circuit diagram and PWB layout for the standby board.
Provides the complete circuit diagrams for the MKI mono board.
Shows the top and bottom view PWB layouts for the MKI mono board.
Presents the detailed circuit diagrams for the MKII mono board.
Displays the top and bottom view PWB layouts for the MKII mono board.
Provides the circuit diagram for the PSU unit in Europe models.
Shows the circuit diagram for the PSU unit in AP models.
Details connectors, modulator, and input/output stages of the amp board.
Explains the Single-Ended (SE) and Bridge-Tied Load (BTL) output stages.
Illustrates the power supply circuits used on the amplifier board.
Shows the top and bottom view PWB layouts for the amplifier board.
Provides a visual exploded view of the set's components.
Lists part numbers and descriptions for miscellaneous components.
Lists changes and additions made to the service manual.
