Philips HTS5561 - Use Your Home Theater; Choose Sound

20
7 Use your home
theater
This section helps you use the home theater to
play media from a wide range of sources.
Before you start
• Make the necessary connections described
inthequickstartguideandtheonscreen
help.
• Completetherst-timesetup.First-time
setup appears when you turn on the home
theaterforthersttime.Ifyoudonot
complete the setup, you are prompted
to complete it each time you turn on the
home theater.
• Switch the TV to the correct source for the
home theater.
Choose sound
This section helps you choose the ideal sound for
your video or music.
1 Press SOUND SETTINGS.
2 Press the Navigation buttons (left/ right) to
access the sound options on the display.
Sound settings Description
SOUND Select a sound mode.
SURROUND Select surround sound or
stereo sound.
TREBLE
Changethehighfrequency
output.
MID
Changethemiddlefrequency
output.
BASS
Changethelowfrequency
output.
AUD SYNC Delay the audio to match the
video.
3 Select an option, and then press OK.
4 Press BACK to exit.
If you do not press a button within a minute, the
menu exits automatically.
Check wireless network settings
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Network] > [View Wireless
Settings], and then press OK.
» The current Wi-Fi settings are displayed.
Name your home theater
To easily identify your home theater on a
network, name your home theater.
1 Turn on your TV, and switch to the correct
source for the home theater.
2 Press (Home).
3 Select [Setup], and then press OK.
4 Select [Network] > [Name your Product:],
and then press OK.
5 Press the Alphanumeric buttons to enter
the name.
6 Select [Done], and then press OK to exit.
EN