Philips HTS5561 - Update Software; Check Software Version; Update Software through the Internet; Update Software through USB

39
English
Update software through USB
What you need
• AUSBashdrive,withatleast75MBof
memory.TheUSBashdrivemustbeFAT
or NTFS formatted. Do not use a USB hard
drive.
• A computer with Internet access.
• An archive utility that supports the ZIP
leformat(forexample,WinZip®for
Microsoft®Windows®orStuft®for
Macintosh®).
Step 1: Download the latest software
1 ConnectaUSBashdrivetoyour
computer.
2 In your web browser, go to www.philips.
com/support.
3 AtthePhilipsSupportwebsite,ndyour
product and locate the Software and
drivers.
» The software update is available as a zip
le.
4 Savethezipleintherootdirectoryof
yourUSBashdrive.
5 Use the archive utility to extract the
softwareupdateleintherootdirectoryof
theUSBashdrive.
» ThelesareextractedundertheUPG_
ALL
folderofyourUSBashdrive.
6 DisconnecttheUSBashdrivefromyour
computer.
9 Update software
To continue to get the best features and support
for your home theater, update the software
regularly. Compare the version of your current
software with the latest version on www.philips.
com/support.
Check software version
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Advanced] > [Version Info.], and
then press OK.
» The software version is displayed.
Update software through the
Internet
1 Connect your home theater to the
network. Use a
• wirednetworkconnection(see‘Setup
thewirednetwork’onpage19),or
• a wireless network connection (see
‘Setupthewirelessnetwork’onpage
19).
2 Press (Home).
3 Select [Setup], and then press OK.
4 Select [Advanced] > [Software Update] >
[Network].
» If an upgrade media is detected, you are
prompted to start or cancel the update.
5 FollowtheinstructionontheTVtoconrm
the update.
» When the software update is complete,
the home theater automatically switches
off and restarts. If it does not, disconnect
the power cord for a few seconds and
then reconnect it.
Note
• If the home theater cannot connect to the
Philips server, press
(Home), and then
select [Setup] > [Network] > [Network
Installation] to set up the network.
EN