Philips HTS5561 - MP3 Player; Ipod or Iphone; Use Smartphone

28
Play music
1 DockyouriPodoriPhone(see‘Dockyour
iPodoriPhone’onpage28).
2 Press DOCK for iPod on the home theater
remote control.
3 Browse on the iPod or iPhone screen to
select music tracks.
• To view the playlist on your TV and
use the home theater remote control
to select a track, press DOCK for iPod
again.
Play video and slideshows
1 DockyouriPodoriPhone(see‘Dockyour
iPodoriPhone’onpage28).
2 On the home theater remote control, press
(Home).
3 Select [browse iPod], and then press OK.
4 Switch the TV to the AV/VIDEO source
(corresponding to the yellow composite
cable).
» The TV screen goes blank.
5 Browse on the iPod or iPhone screen to
select videos or photos.
6 Press (Play) to play the videos or photos.
Use smartphone
Turn your iPhone or Android smartphone into
a virtual remote control, or use it to browse the
contents of a disc or USB storage device on your
home theater.
What you need
• An iPhone (iOS 3.1.3 and above) or
Android (Android 2.1 and above)
smartphone.
• A wired or wireless home network.
Before you start
• Connect your home theater to your home
network(see‘ComputersandtheInternet’
on page 18).
• Nameyourhometheater(see‘Nameyour
hometheater’onpage20).
• Connect your smartphone to the same
home network. For details, see your
smartphone user manual.
MP3 player
ConnectyourMP3playertoplayyouraudioles
or music.
What you need
• An MP3 player.
• A 3.5mm stereo audio cable.
Play music
1 Connect the MP3 player to the home
theaterasdescribedinthequickstartguide.
2 Press SOURCE repeatedly until MUSIC
I-LINK appears on the display panel.
3 Press the buttons on the MP3 player to
selectandplayaudiolesormusic.
iPod or iPhone
When you connect a Philips dock for iPod/iPhone,
you can use the home theater to play music,
movies and photos from your iPod or iPhone.
What you need
• A Philips dock (Model: Philips DCK3060/
DCK3061).
• A yellow composite cable.
Note
• Charge your iPod/iPhone on the dock while
the home theater is in iPod mode.
Dock your iPod or iPhone
1 Move the slide at the bottom of the dock to
STANDARD, and then connect the dock to
the home theater.
2 Connect the yellow composite cable to the
dock and TV.
3 Switch on the iPod or iPhone, and place it
on the dock.
EN