Run Mode
19 iPlayer 3 User Guide
Run Mode LCD Output
The iPlayer 3 LCD displays the following information during Run Mode:
Light Show Brightness
Using the and buttons, you can set the overall brightness level of lights in a show during
playback. The
B
number displayed on the LCD reflects the brightness level you set, between 0%
and 100%.
Trigger Number Message
The LCD displays the current show (trigger) number during playback. If you have not associated
a trigger with a Preset button, the LCD displays an
EMPTY
message when you press that Preset
button.
Lights Off
You can pause Run Mode and show playback at any time by pressing the button. The LCD
displays a
LIGHTS OFF
message and the connected lights turn black until you either:
• Press the button a second time to resume Run Mode
• Press a Preset button to start the selected show from the beginning
LED Indicator Light
The LED indicator light, located to the right of the LCD screen, is active when a show is
playing. It shows the color currently displayed on the fixture assigned to light address 1
on DMX output port 1.
To Next Page
Loading...
