Philips iPlayer 3 - CHAPTER 4 RUN MODE; Run Mode Overview; Playing Shows and Presets

Chapter 5
iPlayer 3 User Guide 22
7. Select an E ND B EHAVIOR type:
–
L OOP
– L IGHTS O FF
–
J UMP TO T RIGGER
8. Select a transition type:
–
S NAP (no transition)
–
F ADE O UT & I N (to black)
–
C ROSS F ADE (effect morphing)
9. As needed, enter a value for the transition duration, then press to save your changes.
Setting an Alarm
Alarms enable you to automate show playback. When you set an alarm, you specify:
• The alarm number (0-15).
• The alarm day: every day, on weekdays, on weekends, on a specific day of the week, or on
a specific date.
• Alarm type:
– Time of day. The iPlayer 3 uses a 24-hour notation with hours ranging from 00 to 23.
– Astronomical time (in relation to sunrise and sunset).
Note: The astronomical time alarm type does not automatically make adjustments for
daylight saving time.
•
The trigger associated with the alarm.
Example 3: Setting Alarm Number 5 to Activate Every Day at Sunset
1. Launch Configuration mode.
2. Access the A LARM menu, then select alarm number 5.
3. Access the A LARM D AYS ? menu, then select E VERY D AY .
4. At the A LARM T YPE ? menu, select A STRONOMICAL .
5. Select S UNSET from the S UNRISE OR S UNSET ? menu.
Note: If you want to add an offset value to trigger the show a certain amount of time
before or after sunset:
a. Enter an A LARM H OUR O FFSET value, then press
b. Enter an
A LARM M INUTE O FFSET value, then press
6. Select a Trigger number with which to associate the alarm.
7. Press to save your changes.