Philips iPlayer 3 - Downloading Triggers from Colorplay 3; Downloading Alarms from Colorplay 3

USB Mode
27 iPlayer 3 User Guide
Downloading Triggers from ColorPlay 3
Triggers are numbered 1-256 and specify parameters including which show file(s) to play (you
can assign multiple show files to a single trigger) and how a show behaves after one playback
cycle, (repeat, for example).
1. Initiate USB Mode.
2. In the ColorPlay 3 configuration layer, click the TRIGGERS tab and then select one or more
triggers in the left column.
3. Click the COPY SELECTED TRIGGERS TO CONTROLLER arrow button to begin downloading.
Downloading Alarms from ColorPlay 3
There are two ways to trigger a show: manually by pressing device buttons or automatically via
alarms. Alarms trigger shows at particular times (such as every Monday at 5:00 p.m.) or for an
astronomical events (such as every day at sunset).
1. Initiate USB Mode.
2. In the ColorPlay 3 configuration layer, click the ALARMS tab, then select one or more alarms in
the left column.
3. Click the COPY SELECTED ALARMS TO CONTROLLER arrow button to begin downloading.