iPlayer 3 User Guide 44
Setup Menu
Setup Parameters
Port 1 Base Trigger #, Port 2 Base Trigger #
Create a show range offset for serial port 1 or serial port 2 (change the starting base show
number for a serial port).
Set Date
Use the Date Editor to enter the correct day, month and year.
Set Time
Use the Time Editor to set the clock time.
Set Latitude
Use the Latitude Editor to set latitude (used to calculate sunrise and sunset).
Set Longitude
Use the Longitude Editor to set longitude (used to calculate sunrise and sunset).
LCD Contrast?
Set the contrast of the LCD screen (0 - 10).
Lat Editor
Latitude Integer?
Integer -180 to 180
Latitude Fraction?
Integer 0 to 100
Long Editor
Longitude Integer?
Integer -180 to 180
Longitude
Fraction?
Integer 0 to 100
S/N Addr Editor
S/N Byte 1? S/N Byte 2? S/N Byte 3? S/N Byte 4? Test S/N? DMX Addr? Program? Test DMX?
Hex 00-FF Hex 00-FF Hex 00-FF Hex 00-FF S/N Test Integer 1-170 Yes DMX Test
No
Date Editor
Year?
Integer 00-99
Month?
Integer 1-12
Day?
Integer 1-31
Duration Editor
Seconds?
Integer 00-59
Minutes?
Integer 0-1000
All Same Addr Editor
DMX Addr? Program? Test DMX?
Integer 1-170 Yes DMX Test
No
Port 1 Base
Trigger #?
Integer 0-255
Set Date
Date Editor
Set Time
Time Editor
LCD
Contrast?
Integer 0-10
LCD
Backlight?
Integer 0-10
Volume?
Integer 0-3
Setup Menu
Set Clock
Set Lat/Long
Set DMX Addr
Test DMX Addr
LCD Setup
Sound Setup
Config Ports
Port 2 Base
Trigger #?
Integer 0-255
Set DMX Addr
By S/N
All Same Addr editor
S/N Addr Editor
DMX By S/N
S/N Addr Editor
All Same DMX
Test DMX Addr
Integer 1-170
Set Latitude
Lat Editor
Set Longitude
Long Editor
Set Time
Zone
TZ Editor
DST?
Yes/No
Triggers
Main Menu
Alarms
Setup
Info
To Next Page
Loading...
