Philips iPlayer 3 - Iplayer 3 Commands; Replies from the Iplayer 3

Configuring Remote Triggering Devices
33 iPlayer 3 User Guide
iPlayer 3 Commands
Note: dd is used below to represent a hexadecimal byte.
X00dd
Set Mode. Sets the current operating mode to dd.
Not currently used.
X0100
Lights Off. Turns all lights off.
X02dd
Set Absolute Intensity. Sets the global brightness level to dd ( 00 = Off, FF = full On).
X03dd
Set Relative Intensity. Raises or lowers the global brightness level by dd (dd is 2’s complement,
so 02 increases by 2, FE decreases by 2). Brightness is pegged between 0 and 255 .
X04dd
Set Show. Starts the show with trigger number dd, playing from the beginning. The trigger
number must be in the range 1 through 225 ( E1 ).
Replies from the iPlayer 3
Y00dd
Returns current mode
Y0100
Entered off mode
Y02dd
Returns current intensity level
Y03dd
Not sent
Y04dd
Returns current show
Y0Fdd
Error occurred, show number in data byte. This is most often returned when the selected show
is not available (so the keypad knows to make the LED blink).