iPlayer 3 User Guide 20
Chapter 5
Configuration Mode
Overview
Configuration mode provides an onboard menu system enabling you to configure show triggers,
set alarms, perform device setup, and view device information without having to connect to your
PC or Mac.
Navigating Menus
• At any time during playback, press to launch Configuration mode and open the Main Menu.
• From any menu, press
and
to scroll through the menu options and make a selection,
then press to access the next menu.
• To save your changes, continue pressing
until you reach the Save Changes menu item,
then press
a final time to save.
• Press
at any time to cancel the menu action and return to Run mode.
Assigning Triggers
You can assign a trigger to either:
• A preconfigured show
• A custom show downloaded from ColorPlay 3
When you assign a trigger, that trigger corresponds to the Preset button with the same number
on the iPlayer 3 faceplate, a keypad button on a Controller Keypad, or a remote triggering
device connected to an AuxBox.
To Next Page
Loading...
