Philips iPlayer 3 - Example 1: Assigning a Preconfigured Show to Preset Button 3; Example 2: Assigning a Downloaded Colorplay 3 Show to Preset Button 4

Configuration Mode
21 iPlayer 3 User Guide
Example 1: Assigning a Preconfigured Show to Preset Button 3
1. Launch Configuration mode.
2. Access the T RIGGERS menu from the Main Menu.
3. Select trigger number 3 .
4. Access the S HOW T YPE ? menu item, then select C ANNED E FFECT .
5. Access the E FFECT T YPE ? menu, then make a selection. There are seven visual effect types from
which to choose:
F IXED C OLOR : Static display of a solid color
C ROSS F ADE : A smooth transition from one solid color to another
R AINBOW : A sequence of solid colors moving in one direction
R ANDOM C OLOR : A sequence of randomly generated solid colors at specified intervals
S PARKLE : Flashes of foreground color at random over a solid background color
C OLOR S WEEP : Progressive transition of a solid foreground color across a solid background
C OLOR S TREAK : An animated effect with narrow lines of color over a solid background
6. Press to access the next menu item, which is an effect-specific parameter, then enter
a value.
7. Continue navigating through the effect-specific parameters and entering values. At the T EST
E
FFECT menu item, press to use the show tester, which runs a live preview of your show.
8. Select a transition type:
– S NAP (no transition)
–
F ADE O UT & I N (fades to black)
–
C ROSS F ADE (effect morphing)
9. As needed, enter a value for the transition duration, then press to save your changes.
Note: Each effect type has unique parameters. For example, some effects use a background
color setting, whereas other effects display only foreground colors. See Appendix F:
Configuration Menus in Detail for iPlayer 3 menu system charts and descriptions of each
menu item.
Example 2: Assigning a Downloaded ColorPlay 3 Show to Preset Button 4
1. Launch Configuration mode.
2. Access the T RIGGERS menu from the Main Menu.
3. Select trigger number 4.
4. Access the S HOW T YPE ? menu, then select D OWNLOADED S HOW .
5. Access the S HOW F ILE ? menu, then select a .SHO file.
6. At the T EST S HOW menu, press to use the show tester, which runs a live preview of
your show.