10
Timer function
Locking the set
This menu allows you to use your TV as an
alarm clock.
& Press
H
.
é Select
FEATURES
(
Ï
) and press
¬
twice.
The
TIMER
menu appears :
“ Press
¬
to enter and exit the sub-menus
and use keys
îÏ
to adjust:
‘
TIME
: enter current time.
Note:
the time is updated automatically each time
the set is switched on using teletext information
taken from programme 1. If programme 1 does
not have teletext, the update will not take place.
(
START TIME
: enter the start time.
§
STOP TIME
: enter the stop time.
è
PROG. NO.
: enter the number of the
programme required.
!
ACTIVATE
: you can set the alarm to be
activated:
•
ONCE ONLY
for a one-off alarm,
•
DAILY
for a daily alarm or
•
STOP
to cancel.
ç Press
b
to set the TV to standby. It will
automatically switch on at the time
programmed. If you leave the TV switched on,
it will only change programme at the time
indicated.
The combination of the CHILD LOCK and TIMER
functions may be used to limit the length of time
your television is in use, for example, by your
children.
You can bar access to certain programmes or
completely lock the set by locking the keys.
Locking programmes
& Press
H
.
é Select (
Ï
) and press
¬
.
“ Select
PARENTAL. CONT.
(
Ï
) and press
¬
.
‘ Enter your confidential access code.The first
time, enter the code 0711 then confirm by
re-entering 0711.The menu appears.
( Press
¬
to go into the menu.
§ Use keys
îÏ
to select the required
programme and confirm with
¬
.The symbol
+
is displayed alongside the programmes or
sockets that have been locked.
è Press
d
to exit.
To watch a programme which has been locked
you will now need to enter the confidential
code; otherwise the screen will remain blank.
The INSTALL menu access is also locked.
Caution:
in the case of encrypted programmes
which use an external decoder, it is necessary to
lock the corresponding EXT socket.
To unlock all programmes
Repeat stages & to ‘ above, then select
CLEAR ALL
and press
¬
.
To change the confidential code
Repeat stages & to ‘ above, then:
( Select
CHANGE CODE
and enter your own 4-
digit number.
§ Confirm by entering it again.
Your new code will be stored.
è Press
d
to exit from the menus.
If you have forgotten your confidential code, enter
the universal code 0711 twice.
Locking the keys
& Press
H
, select
FEATURES
(
Ï
) and press
¬
.
é Select
CHILD LOCK
(
Ï
) and press
¬
to set
the lock to
ON
.
“ Switch off the set and put the remote control
out of sight.The set cannot be used (it can only
be switched on using the remote control).
‘ To cancel: switch
CHILD LOCK
to
OFF
.
• PICTURE
• SOUND
• FEATURES
• INSTALL
FEATURES
TIMER
• TIME
• START TIME
• STOP TIME
• PROG; NO;
• ACTIVATE
10:56
• PICTURE
• SOUND
• FEATURES
• INSTALL
FEATURES
• TIMER
• CHILD LOCK
• PARENTAL CONT
• ROTATION
ACCES CODE
- - - -
9
Adjusting the picture
Adjusting the sound
& Press
H
then
¬
.
The
PICTURE
menu appears :
é Use
îÏ
keys to select a setting and
Ȭ
keys to adjust.
Note:
the menu is a scroll-down menu.
Keep the key
Ï
held down to access the
settings hidden at the bottom of the screen.
“ Once the necessary adjustments have been
made, select the option
STORE
and press
¬
to store them.
‘ To exit from the menus, press
d
.
Description of the settings:
•
BRIGHTNESS
: alters the brightness of the
image.
•
COLOUR
: alters the colour intensity.
•
CONTRAST
: alters the variation between
light and dark tones.
•
SHARPNESS: alters the crispness of the image.
•
STORE
: stores the picture settings.
•
COLOUR TEMP.
: adjusts the colour
temperature of the picture.Three options
are available here:
COOL
(blue white),
NORMAL
(balanced) or
WARM
(red white).
•
CONTRAST +
:To activate / de-activate the
automatic contrast adjustment system (the
dark areas are made darker whilst
maintaining the detail).
& Press
H
, select the
SOUND
option (
Ï
) and
press
¬
.The
SOUND
menu appears :
é Use
îÏ
keys to select a setting and keys
Ȭ
to adjust.
“ Once the necessary adjustments have been
made, select the option
STORE
and press
¬
to store them.
‘ To exit from the menus, press
d
.
Description of the settings:
•
EQUALIZER
: to adjust the sound tone (from
bass: 120 Hz to treble: 10 kHz).
•
BALANCE
: to balance the sound between the
left and right speakers.
•
DELTA VOLUME
(volume difference): allows
you to compensate for the volume differences
between the different programmes or the
EXT sockets.This setting is available for
programmes 1 - 40 and the EXT sockets. Use
the
@
P
#
keys to compare the level of
different programmes.
•
STORE
: stores the sound settings.
•
AVL
: automatic volume control used to avoid
sudden increases in volume, particularly when
changing programmes or during advertisements
• PICTURE
• SOUND
• FEATURES
• INSTALL
PICTURE
• BRIGHTNESS
• COLOUR
• CONTRAST
• SHARPNESS
• STORE
• COLOUR TEMP.
• CONTRAST+
--I------ 39
• PICTURE
• SOUND
• FEATURES
• INSTALL
SOUND
• EQUALIZER
•
SURROUND MODE
• DELTA VOLUME
• STORE
• AVL
120 HZ
500 HZ
1500 HZ
5 KHZ
10 KHZ
Feature settings
& Press
H
, select
FEATURES
(
Ï
) and press
¬
.You can adjust:
é
TIMER
,
PARENTAL. CONT.
and
CHILD LOCK
:
see next page
“
MODE SELECT.
: to switch the TV in radio,TV or
PC mode.
‘
EASYLINK
(only available on certain versions) : If
the set is connected (by the EXT2 socket) to
a video equipped with the EasyLink function,
the language, country and channels found are
automatically transmitted to the video
recorder at the time of installation. If your
video recorder is not equipped with this
function, set to
OFF
.
( To quit the menus, press
d
.
To Next Page
Loading...
Need help?
General
