Philips Magic 5 - Acoustic room monitoring; Setting up room monitoring; Ending room monitoring

20
11 Modify the date.
12 Confirm with _.
13 Modify the time.
14 Confirm with _.
Deleting a birthday
1 Press /, and using / select ACCESSORIES.
2 Confirm with _.
3 Dial using /
BIRTHDAY.
4 Confirm using _.
5 Using / select the entry which you would like to de-
lete.
6 Press ô
Option.
7 Dial using / DELETE ENTRY.
8 Confirm using _.
9 Confirm the deletion with ô
Yes.
Changing the ringer tone
Changing the ringer tone
You can assign a separate ring tone to each birthday re-
minder.
1 Press /, and using / select
ACCESSORIES.
2 Confirm with _.
3 Dial using /
BIRTHDAY.
4 Confirm using _.
5 Using / select the entry to which you would like to
assign a new ring tone.
6 Press ô
Option.
7 Using / select RINGER TYPE.
8 Confirm with _.
9 Select the desired ring tone using /.
10 Confirm with _.
11 Using /, set the volume.
12 Confirm with _.
Acoustic room monitoring
Existence of several devices is the prerequisite
Room monitoring
With this function you can acoustically "monitor" a room
(for example, a children's bedroom).
Setting up room monitoring
Set up the room monitoring on the receiver unit first.
1 On the receiver unit, press /, and using / select
ACCESSORIES.
2 Confirm using _.
3 Dial using /
ROOM MONITOR..
4 Confirm using _.
5 Using / select the transmitting cordless telephone.
6 Press ô
Call.
7 The transmitting unit starts ringing. Press “ to accept
the call.
8 Activate hands-free on the receiver unit: Press “ to
switch hands-free on/off. Using /, set the volume.
The cordless telephones are now connected to each other
in the monitoring mode. Place the transmitting unit in the
room which you would like to acoustically monitor. Keep
the receiver unit with you.
Room monitoring
Telephone calls during room monitoring
If you get a call when you are in the room monitoring
mode, only the device rings. On the cordless telephone, the
display gets lit up and a message appears.
1 Press ô
ACCEPT on the cordless telephone to accept
the call.
2 Press ’ to end the call. The cordless telephone returns
to the room monitoring mode.
You can place a call when in the room monitoring mode.
1 Press ô
Call and dial the desired number.
2 Press “ to make the connection.
3 Press ’ to end the call. The cordless telephone returns
to the room monitoring mode.
Ending room monitoring
Press ’ on any one of the cordless telephones to end the
room monitoring mode.
This function is available only if you have registered
several cordless telephones with your device and the
telephones are within the range of the machine.
If you get a call when you are in the room monitoring
mode, only the device rings. On the cordless tele-
phone, the display gets lit up and a message appears.