30
Calling SMS functions
On the device
SMS Functions on the Machine
1 While reading an SMS message, press _ to load ad-
ditional SMS functions.
2 Use / to select an option: You can display informa-
tion about the SMS message, print or delete the mes-
sage, forward the message to another recipient or send
an SMS response. You can return to the list of SMS
messages, or view the next or previous SMS message.
3 Confirm with _.
On the cordless telephone
1 Select the SMS to read.
2 Press ô
Select.
3 Select an option using /. You can reply the SMS. You
can move the message to the Archive folder, delete it or
forward it to some other recipient. You can call the
number of the sender or save it to the telephone book.
4 Confirm with _.
Printing an SMS
Printing an SMS on the Machine
1 Press _, 63 and _.
2 Use / to select the SMS messages you would like to
print out.
PRINT: ALL—Prints all received and composed SMS
messages
PRINT: INBOX—Prints all received SMS messages
PRINT: OUTBOX—Prints all sent SMS messages
PRINT: NEW—Prints all unread SMS messages
3 Confirm with _.
Deleting SMS
On the device
Deleting an SMS on the MachineSMS Deletion Introduction
If the message memory is full, the machine cannot receive
any more messages. Delete SMS messages to free up mem-
ory.
1 Press _, 64 and _.
2 Use / to select the SMS messages you would like to
delete:
DELETE: ALL SMS—Deletes all received and com-
posed SMS messages
DELETE: READ SMS—Deletes all read SMS messages
DELETE: SENT SMS—Deletes all sent SMS messages
3 Confirm with _.
4 Confirm the deletion with _.
On the cordless telephone
Deleting individual SMS
1 Select the SMS to read.
2 Press ô
Select.
3 Select using / DELETE ENTRY.
4 Confirm with _.
5 Confirm the deletion with ô
Yes.
Emptying the message folder
Emptying the message folder
1 Press W.
2 Using / select
DELETE SMS.
3 Confirm with _.
4 Select the folder you would like to clear using /.
5 Confirm with _.
6 Confirm the deletion with ô
Yes.
Modifying the settings
Available only on the device
Changing Send and Receive Numbers
Send and Receive Numbers
All numbers that you need to send and receive SMSs are
stored in your device. In case you moved to another tele-
phone service provider, you must change these numbers.
You can set your device for two SMS service providers.
1 Press _, 66 and _.
2 Use / to select the SMS service provider that you
would like to set.
3 Confirm using _.
4 Enter the number for sending SMSs.
5 Confirm using _.
6 Enter the number for receiving SMSs.
7 Confirm using _.
8 Use / to select the SMS service provider through
which you would like to send SMSs.
9 Confirm using _.
Switching Off Automatic Printing
Automatic Printing
You can deactivate the automatic printing of SMS messag-
es.
1 Press _, 66 then _ repeatedly until
PRINT
SMS: YES
appears on the display.
2 Use / to select whether you would like to switch the
printing on or off.
3 Confirm with _.
If you would like to print an individual SMS mes-
sage, load the message. Press j to print the
message.
If you would like to delete an individual SMS
message, load the message. Press _, then select
DELETE with / . Confirm with _.
This function deletes all SMSs in a message folder.
You can also call the function by pressing / and
selecting using /
SMS. Confirm using _.
These functions are available only on the device.
You can receive SMS messages via both providers.
To Next Page
Loading...
