Philips MCD900 - Play Modes and Sound Customization; Audio Balance and External Volume Control

19
English
Turn on or off • [Direct source] in [Settings]
> [Sound settings].
Tip
When • [Direct source] is on, you can still
adjust the volume and [Balance].
The sound effect settings are retained and
•
enabled when [Direct source] is off.
Audio balance
With [Balance], you can improve listening experience
by adjusting difference between the left and right audio
channels.
1 From Home screen, go to [Settings] > [Sound
settings] > [Balance].
Or, press
• SOUND on the remote control
to enter the menu of sound settings.
2 Press / repeatedly to increase/decrease the
output from left/right audio channels.
Press
• CLEAR for equal output from left/
right audio channels.
Set the volume from the external audio
device
With [AUX in volume], you can set the volume from
the connected external device (see ‘Connect external
audio devices’ on page 13).
1 From Home screen, go to [Settings] > [Sound
settings].
Or, press
• SOUND on the remote control
to enter the menu of sound settings.
2 Go to [AUX in volume]. Select the desired
volume level.
Display settings
Brightness
On MCD900, you can adjust the brightness of the
display. As desired, the display lights up, dims or turns
off when MCD900 is turned on or switched to active
standby.
In
• [Settings] > [Display settings] > [Brightness
when on] or[Brightness when standby], select an
option and press OK.
Or, on the remote control, press
• BRIGHTNESS
to select the brightness options for the display.
Wallpaper
For menus on MCD900, you can set the background
display (wallpaper).
To set wallpaper
1 On MCD900, select and play a photo.
9 Settings
Play modes
When playing music, you can choose to play repeatedly,
play in random order, or play one by one. Select a play
mode as desired.
To select a play mode for music play
Before or during music play,
From Home screen, go to
• [Settings] > [Play
mode]; Or,
Press
• REPEAT or SHUFFLE repeatedly on
the remote control.
»
- Play all songs in current folder
repeatedly;
»
- Play current song repeatedly;
»
- Play all songs in current folder
randomly.
Sound settings
On MCD900, you can select different sound settings in
[Settings] > [Sound settings].
1 From Home screen, go to [Settings] > [Sound
settings].
Or, press
• SETTINGS on the remote control
to enter [Settings].
2 Select the option. Press OK to turn it on or off.
Or,
On the remote control, press SOUND to enter the
menu of sound settings.
Bass and treble
Use [Bass / Treble] to adjust the low (bass) or high
(treble) range of musical notes.
1 From Home screen, go to [Settings] > [Sound
settings] > [Bass / Treble].
Or, press
• SOUND on the remote control
to enter the menu of sound settings.
2 Press / repeatedly to increase/decrease the
level.
Press
• CLEAR to select neutral level.
Full sound
[FullSound] restores the sonic details that music
compression loses (e.g. MP3, WMA).
Turn on or off [FullSound] in [Settings] >[Sound
settings].
Direct Source
With [Direct source], you can turn off the settings of
sound effects on MCD900, including [FullSound] and
[Bass / Treble].
Thus, music plays in an original way, without the sound
effects from MCD900.
EN