Philips NTX400 - Play audio through Bluetooth; Connecting your Bluetooth Device; Play from Bluetooth device

12 EN
5 Play audio
through
Bluetooth
The product can stream music from your
Bluetooth device to the system through
Bluetooth.
Connect a device
Note
• Before pairing a device with this product, read its user
manual for Bluetooth compatibility.
• The product can memorize a maximum of eight paired
devices.Theninthpaireddevicewillreplacetherst
one.
• Any obstacle between this product and a Bluetooth
device can reduce the operational range. Keep away
from any other electronic device that may cause
interference.
• The operational range between this product and a
Bluetoothdeviceisapproximately10meters(30feet).
Option 1: Connect a device through
NFC
NearFieldCommunication(NFC)isa
technology that enables short-range wireless
communication between various NFC
compatible devices, such as mobile phones and
IC tags.
If your Bluetooth device supports NFC, you can
connect it with this product easily.
1 Enable the NFC feature on your Bluetooth
device(refertoitsusermanual).
2 Tap the NFC tag on the top of the product
with the NFC area of your Bluetooth
device until you hear a beep.
3 On your Bluetooth device, accept the
pairingrequestwith"PhilipsNX4".
4 Follow the on-screen instructions to
complete the pairing and connection.
» After successful connection, [BT
CONNECTED] (BTconnected)
scrolls on the screen, and the product
beeps twice.
Option 2: Connect a device manually
1 Press SOURCE repeatedly to select [BT]
source.
2 On your Bluetooth device, enable
Bluetooth and search for Bluetooth devices
that can be paired (see the user manual of
thedevice).
3 Select [Philips NX4] displayed on your
device for pairing.
» After successful connection, [BT
connected] (BTconnected)scrolls
on the screen, and the product beeps
twice.
Play from Bluetooth device
After successful Bluetooth connection, play
audio on the Bluetooth device.
» Audio streams from your Bluetooth
device to this product.