Philips NTX600 - 4 Play; Play from a Disc or USB

10 EN
4 Play
Play from a disc or USB
Play disc
Note
• Make sure that the disc contains playable audio
contents.
1 Slide CROSS FADER to the far left.
2 Press CD to select the disc source.
3 Press on the main unit to open the disc
tr ay.
4 Load a disc on the disc tray, with the
printed side facing up.
5 Press on the main unit to close the disc
tr ay.
• To start, pause, or resume play, press
.
• To stop play, press .
• To select another track, press or .
• To select an album, press ALB/
PRESET+/-.
• To search within a track, press and
hold or , then release to resume
normal play.
Play from a USB A device
Note
• Make sure that the USB device contains playable audio
contents in supported formats.
1 Slide CROSS FADER to the far left.
2 Insert the USB plug of the device into the
USB A socket.
3 Press USB A to select the USB A source.
4 Press ALB/PRESET+/- to select an album.
5 Press or toselectanaudiole.
6 Press to start play.
• To pause or resume play, press .
• To stop play, press .
• Tosearchwithinanaudiole,press
and hold or , then release to
resume normal play.
Delete from a USB device
1 In USB A mode, press to stop music
playback.
2 Press or toselectanaudiole.
• To delete an audio folder, press ALB/
PRESET+/- to select an audio folder,
then press or toselectale.
3 Press USB DELETE repeatedly to select:
• [DEL FILE](Deletele):Delete
currentaudiole.
• [DEL DIR](Deletedirectory):Delete
current audio folder.