Philips NTX600 - Apply NX Bass Effect; Adjust Equalizer Settings

17EN
Apply NX Bass effect
NX Bass effect adds clean and lively
characteristics to your music with rather low
background noise.
• During play, press NX Bass. Then the
sound will change in 3 stages:
• Stage 1: The sound volume increases to
a higher level and stays at this level for
5 seconds.
» [FIRING](ring)isdisplayed.
• Stage 2: The sound volume gradually
decreases to its original level in 10
seconds.
» [DISCHARGE](discharge)isdisplayed.
• Stage 3: The sound volume keeps at
normal level for 40 seconds.
• If you press NX Bass again,
[RECHARGE](recharge)isdisplayed.
Adjust equalizer settings
Custom Equalizer lets you increase or decrease
thegainforspecicfrequencyranges,andadjust
audio output to your own preferences.
1 Press CUSTOM on the main unit.
2 Switch the Custom Equalizer knobs to
adjust the equalizer settings for each of the
three frequency ranges.