Philips Pi3900 - Bluetooth Audio and GPS

16 EN
b Select the option to switch on
Bluetooth.
»
is displayed on the status bar.
c Tap SEARCH FOR DEVICES.
» The device is displayed under
AVAILABLE DEVICES after it is
discovered.
3 Pair with the device:
 On Pi3900, tap the device, and enter
the passcode as prompted;
 On the device, enter the passcode as
prompted.
» A message is displayed when the
pairing is complete.
Get connected by another Bluetooth
devices
1 Make sure that Pi3900 is discoverable by
another Bluetooth device:
a From the Home screen, tap
Settings > Bluetooth.
b Select the option to switch on
Bluetooth.
c Tap Pi3900.
» *Pi3900 is discoverable for two
minutes.
2 On the Bluetooth device, search for and
pair with Pi3900.
 For information about the steps,
consult the user manual of the
Bluetooth device.
Tip

* To change the device name of Pi3900, go to
Settings > Bluetooth, tap
and select Rename tablet.
6HQGRUUHFHLYHÀOHVWKURXJK
Bluetooth
6HQGÀOHVWRDQRWKHU%OXHWRRWKGHYLFH
1 Make sure that
 you have paired Pi3900 with the
Bluetooth device;
 on Pi3900 and Bluetooth device,
Bluetooth is on.
2 On Pi3900VHQGÀOHVWKURXJK%OXHWRRWK
a In Gallery, play a photo. Tap
>
Bluetooth.
b Tap the paired device to start sending.
» When sending or receiving is in
progress,
is displayed at the top
of the screen.
3 2QWKH%OXHWRRWKGHYLFHUHFHLYHWKHÀOHV
 &RQÀUPDVSURPSWHG
 6DYHWKHÀOHVDVSURPSWHG
5HFHLYHÀOHVIURP%OXHWRRWKGHYLFH
1 Make sure that
 you have paired Pi3900 with the
Bluetooth device;
 on Pi3900and Bluetooth device,
Bluetooth is on.
2 2QWKH%OXHWRRWKGHYLFHVHQGÀOHVWR
Pi3900 through Bluetooth.
3 On Pi3900UHFHLYHWKHÀOHV
 At the top of the screen, tap
.
&RQÀUPDVSURPSWHG
» <RXFDQDOVRÀQGWKHUHFHLYHG
ÀOHVLQ
Settings> Bluetooth. Tap
and select 6KRZUHFHLYHGÀOHV.