Change settings 13
Photo playback
1 Repeat step 1 to 3 in ‘Movie playback’, and
the media player screen is displayed.
• Music: access and play audio files only.
• Videos: access and play video files only.
• Photos: access and play photo files
only.
2 Select Photos to activate photo media
player and access photo files.
• If photo media player is selected,
only the playable photo files can be
displayed.
3 Select a photo file and press OK to start a
slideshow play.
• To change a slideshow interval, press
on the remote control (or on the home
menu, select Settings & Preferences) to
access the settings menu, then navigate
to Slideshow Duration.
9 Change settings
This section helps you change the settings of
the projector.
1 Press on the remote control, or select
Settings & Preferences on the home menu
to access the settings menu.
2 Use the Navigation buttons and OK to
change the following settings. You may also
use on the projector to confirm selection.
• Language: Select a language for on-
screen menu.
• Slideshow Duration: Select a slideshow
interval.
• ECO Mode: Activate or deactivate
energy saving mode. If Auto is selected,
energy saving mode is activated when
low battery power occurs.
• Projection Direction: Select a direction
of projection corresponding to
particular placement of the projector.
• Access the WiFi settings to connect the
projector to s WiFi network (Internet).
• Keystone Correction: Correct keystone
images to be rectangular. If Manual is
selected, press / to adjust image
shape manually.
• Firmware Upgrade: Upgrade system
software via USB or online.
• Firmware Version: Display the current
software version of the projector.
To Next Page
Loading...
