Page 25 of 33
Recording
Click on Recording from the Recorder/Player submenu.
1. Verify the dictation audio format is set to WAV with PCM as the format type and
8,000 kHz, 16 Bit, Mono for the attribute. If not set this way then click the
Configure… link to set those settings.
2. Verify this recording option is checked: ‘Recorder can enter Record Standby
mode’. Next click the [Apply] button to save settings.
Options
Click on Options from the Recorder/Player submenu.
1. Verify the all the options are checked.
2. Click the [Apply] button to save settings.
To Next Page
Loading...
