How to fix Philips Projector screen mirroring after Android/iOS firmware update?
To resolve issues with screen mirroring after a firmware update on your Android or iOS device, it is recommended to check regularly for new firmware for your Philips Projector. Then launch the screen mirroring app on your projector by pressing the mirroring option on the remote control.
Why Philips Screeneo S4 Projector cannot read USB stick?
If your Philips Projector cannot read the USB stick, it may be because the projector does not support the exFAT file system. Format the USB stick in FAT format and try again.
Why screen mirroring does not work with Android device on Philips Projector?
If screen mirroring isn't working with your Android device on your Philips Projector, your device must support Miracast. Check your Android device's user manual to see if it supports Miracast (also known as Screencast, Screen Sharing, WiFi Direct, Wireless Display, etc.) and how to enable it. You can also install the HappyCast app on your smartphone and follow the instructions given in the app.
Why is Philips Screeneo S4 video distorted or sound unsynchronized?
When viewing videos on your Philips Projector, if the sound or picture is distorted, or the sound is not synchronized, it could be due to insufficient Wi-Fi bandwidth, a slow smartphone, or parallel connections on your smartphone. The available Wi-Fi bandwidth might be insufficient for sending the video flawlessly from the smartphone to the projector because one or more Wi-Fi networks operate in the same frequency range nearby, certain IoT devices also operate in this frequency range. Your smartphone might not be fast enough to compress the screen data and send it simultaneously over Wi-Fi or your smartphone may maintain parallel connections to your home network and the projector. Disabling temporarily the connection to your home network may help.
Is it normal for the Philips Projector's surface to be warm?
It is normal for the surface of your Philips Projector to generate moderate heat during operation.
Instructions on how to turn the projector on for the first time and put it into standby.
Steps for connecting to Wi-Fi and activating the on-screen pointer for navigation.
How to wirelessly stream audio from a Bluetooth-enabled device to the projector.
Steps for pairing the projector with external Bluetooth speakers for audio output.
Instructions for connecting playback devices via HDMI and audio devices via S/PDIF.
Guide for wirelessly mirroring content from iOS, Mac, and Android devices.
General| Built-in display | No |
|---|---|
| Native resolution | 1920 x 1080 pixels |
| Native aspect ratio | 16:9 |
| Projection distance | 0.24 - 4.57 m |
| Supported aspect ratios | 4:3, 16:9 |
| Contrast ratio (typical) | 100000:1 |
| Screen size compatibility | - \ |
| Projector native resolution | 1080p (1920x1080) |
| Product color | Black, Silver |
| Compatible operating systems | Android |
| Product type | Short throw projector |
| Market positioning | Home cinema |
| Noise level | - dB |
| Projection modes | Ceiling, Front, Rear |
| Number of OSD languages | - |
| Light source type | LED |
| Service life of light source | 30000 h |
| Focus | Auto |
| Throw ratio | 1.2:1 |
| Focal length range | - mm |
| Internal memory | 16 GB |
| RMS rated power | 5 W |
| Number of built-in speakers | 2 |
| Wi-Fi standards | 802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac) |
| Bluetooth version | 4.0 |
| Ethernet LAN (RJ-45) ports | 1 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Power source | AC |
| AC input voltage | 100-240 V |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 150 W |
Weight and Dimensions| Width | 192 mm |
|---|---|
| Height | 110 mm |
| Weight | 1840 g |
| Dimensions (WxDxH) | 192 x 192 x 110 mm |
To Next Page