English
HD
Re-establishing Wi-Fi connection
After upgrading or restoring the Center’s
firmware, you need to re-establish the Wi-Fi
connection between Center and Stations.
On the WAS5 Stations,
● Enter Installation Mode by:
a. Remove the Station’s power plug and then,
connect it to the power supply again.
➜ “Connecting to Center” appears
b. Press MENU or STOP to enter the
selection screen of Installation Mode and
Select Server
c. Use the navigation controls 3 or 4 and 2 to
select Installation Mode
On Center,
● Select HD mode and then, enter Installation
Mode by:
a. Press MENU.
b. Use the navigation controls 3 or 4 and 2 to
enter Station Mgnt menu
c. In Station Mgnt menu, use the
navigation controls 3 or 4 and 2 to select
Add New Station
➜ Searching for Stations starts.
On Center,
● Press STOPÇto exit Installation
Mode when Center has found all the stations.
WACS5_Eng/37 8/3/2005, 15:1235
To Next Page
Loading...
