Phoenix Auto Equipment
-Address: 2711 East Craig Road Ste #E, North Las Vegas, NV, 89030 United States
- Website: https://www.phoenixautoequipment.com
- Phone: 7025802883
22 / 22
10.Trouble Shooting
Error Solution
Bead Breaker does not move or
does not have enough pressure.
Check hose connections and
fittings. Check seals inside bead
breaker cylinder. If seals are bad,
replace seals. Replacement seals
were provided with tire changer.
Check inside cylinder to be sure
there are no gouges in the metal.
Turntable will not turn Check all wire connections. Check
foot pedal and electrical switch. If
motor is defective, return motor
for inspection and repair or
replacement.
Demount hexagon bar will not
stay in locked position
Replace locking plate.
One of the air functions do not
work
Check foot pedal valve, air lines
and fittings for leaks. If air is
reaching the foot pedal from the
air tank, but not being sent on to
final destination, then replace
foot pedal air valve.
clamps expand/open or inward/
close is slow
Clean the turntable and cylinder.
Clean muffler.
To Previous Page
Loading...
Need help?
General