Phoenix Auto Equipment
-Address: 2711 East Craig Road Ste #E, North Las Vegas, NV, 89030 United States
- Website: https://www.phoenixautoequipment.com
- Phone: 7025802883
15 / 22
4. Operating Tests
a. Test the rotation direction of the motor
This test is only for the tire changer with 1phases.
When the reverser control pedal (4) is pressed down, the
turntable should turn in a clockwise direction.
b. Operating test
Turn the handle (10) to lock the horizontal arm.
When the reverser control pedal (4) is pressed down, the
turntable (8) should turn in a clockwise direction.
When the reverser control pedal (4) is pulled up, the turntable (8)
should turn in a counterclockwise direction.
Pressing the clamp control pedal (2) opens the four clamps (9);
when the pedal is pressed again they close.
Pressing the bead breaker control pedal (3) activates the bead
breaker; when the pedal is released the bead breaker returns to
its original position.
Pressing lightly the Inflating control pedal (1) the inflating gun
inflates.
Pressing inflating control pedal (1) again, the inflating gun inflates
and the eyelet near the sliding block blast inflate at the same
time.
5. Operation
The operation of the tire changer is divided into three parts:
breaking the bead, removing the tire and mounting the tire.
Note: The tire changer must be operated by professional personnel.
a. Breaking the Bead
To Next Page
Loading...
Need help?
General