Phoenix Auto Equipment
-Address: 2711 East Craig Road Ste #E, North Las Vegas, NV, 89030 United States
- Website: https://www.phoenixautoequipment.com
- Phone: 7025802883
7 / 22
fast or too slow, adjust the needle valve by using a screwdriver.
Check that a drop of oil is injected into the reservoir every 5-6
times the pedal is pressed down.
c. Problems due to Misoperation and Means of Settlement
Make sure that the machine is well grounded to avoid electric
leakage.
To prevent industrial accidents, do not place your legs between
the bead breaker and the wheel supporter. When the bead
breaker pedal is operated the bead breaker arm moves quickly
and powerfully. Anything within its range of action can be in
danger of being crushed.
Bead breaking with the clamps in open position can be
extremely dangerous for operator's hands.
ALWAYS keep hands and body back from inflating tire
To prevent industrial accidents, keep hands and other parts of
the body as far as possible from the tool arm when the table
top is turning.
Do not place your hands on the wheel: when moving the arm to
its working position your hand could be crushed between the
rim and the mounting head.
During bead breaking operations NEVER touch the side of the
tire.
3. Product Installation
a. Unpacking
Un-package and remove all plastic wrapping from tire changer.
After removing the package be sure that the equipment is
complete and intact, checking that no visible damage is present.
To Next Page
Loading...
Need help?
General