Phoenix Auto Equipment
-Address: 2711 East Craig Road Ste #E, North Las Vegas, NV, 89030 United States
- Website: https://www.phoenixautoequipment.com
- Phone: 7025802883
4 / 22
b. Intended Use
The semi-automatic tire changer has been designed and
manufactured exclusively for removing and mounting tires
from/onto rims and inflating the tires. With the unique help
device, it could handle tires with hard and stiff tire wall.
Max. Tire Dia. 43”
Max. Tire Width. 15”
In particular the manufacturer cannot be held responsible for
any damage caused through the use of this tire changer for
purposes other than those specified in this manual, and
therefore inappropriate, incorrect and unreasonable.
c. Precaution
Any tampering or modification to the equipment carried out
without the manufacturer’s prior authorization will free
Manufacturer from all responsibility for damage caused directly
or indirectly by the above actions.
d. General Safety Rule
When placing the tire changer, be sure that to complies with
current safety code at work regulations.
The tire changer must be connected to the main electric power
supply and the compressed air system. Please install the
machine near the power sources.
Must provide at least the space shown in (Fig.1) to allow all
parts of the machine to operate correctly and without any
restriction.
If the machine is installed outside it must be protected.
The tire changer comes with electric motor, so it cannot be
used in explosive atmospheres.
To Next Page
Loading...
Need help?
General