Need help?Do you have a question about the Phoenix SPC10e and is the answer not in the manual?
Guidance on entering the machine and adjusting the operator's seat and steering column for comfort and access.
Details of the seat's air suspension and the adjustable front steering column.
Instructions for setting five rear-view mirrors to ensure comprehensive side and rear visibility.
Warns of obscured rear views with raised sides and provides safe reversing advice.
Explains the purpose of the reverse warning bleeper and the requirement for daily operational checks.
Advises against solely relying on the bleeper; emphasizes checking surroundings for safety.
Illustrates the layout of switches, lights, and gauges on the front console.
Lists engine and transmission controls and their specific positions within the machine.
Details engine and transmission system gauges and warning lights on the front console.
Lists additional warning lights applicable only to the JCB engine version.
Explains the parameters shown on the engine multi gauge and how conditions are indicated.
Describes the meaning of amber and red engine warning lights and necessary actions.
Explains the red light for a blocked air cleaner and the required maintenance.
Details the warning for low transmission oil pressure and recommended steps.
Describes the low air pressure warning and its impact on cut-off blades.
Step-by-step instructions for safe engine startup, including pre-start checks.
Outlines the three engine throttle positions and their respective RPMs.
Guidance for cold starting the PERKINS engine using its specific cold start aid.
Details the correct method for stopping the engine, including turbocharger cool-down.
Visual representation of the side console and joystick controls for JCB engine models.
Explains engine speed control differences between PERKINS and JCB engines.
Advises on isolating the battery when the machine is idle and general battery safety.
Warns against tow starting and provides instructions for safe jump starting.
Guidance for the initial 50 hours of operation to ensure proper engine break-in.
Describes the hydrostatic transmission, its benefits, and the available speed range options.
Confirms the machine features permanent four-wheel drive that cannot be disengaged.
Visual representation of the side console and joystick controls for Perkins engine models.
Explains the low and high speed ranges, their performance characteristics, and warnings.
Details the method for changing between speed ranges using the front console switch.
Describes Mid Range effect on top speed in LOW range, suitable for spreading accuracy.
Explains Mid Range effect on top speed in HIGH range, useful for climbing slopes.
How the joystick manages ground speed, braking, and ensures smooth machine operation.
Advice for operating in HIGH range, particularly on gradients, to maintain control.
Explains the safety feature that disables the joystick if the operator leaves the seat.
Details the interaction between the park brake and joystick, including safety implications.
Procedures for changing direction and understanding the machine's behavior in NEUTRAL.
Explains how the controller sets the maximum ground speed for precise control.
Describes the overload device that prevents engine stall and the procedure to regain control.
Explains how the hydrostatic transmission provides service braking and when conventional brakes are needed.
Details the operation of front and rear brakes, including the reserve hydraulic supply.
Details the spring-applied, hydraulic-released park brake system and its control lever.
Step-by-step instructions for engaging and releasing the park brake safely.
Actions to take during an electrical failure, emphasizing park brake application before leaving operator position.
Guidance on manually releasing park brake calipers and gearbox brake during system failure.
Explains the hydrostatic steering system, its low resistance, and lack of feedback.
Discusses potential steering stiffness and checks for debris jamming the steering mechanism.
Guidance on limited manual steering when the engine is not running in an emergency.
Visual overview of the digital meter, showing parameters like speed, RPM, and buttons.
Lists parameters displayed by the meter: ground speed, distance, RPM, and delay function.
Step-by-step instructions for resetting distance totalisers (M PART and M TOTAL) to zero.
Explains how to view and change the ON/OFF status of the delay function for feedrollers.
To Next Page
General