Instruction & Maintenance Manual Sheet 1.27
Phoenix ‘SPC10e’ Self Propelled Metering Chipping Spreader 03/12
Reverse Warning Bleeper
The reverse warning bleeper will sound at a high pitch to attract
the attention of anybody close to the machine. When reverse is
selected it will sound to alert anybody to the side or behind the
machine that it is immediately about to manoeuvre backwards.
The volume emitted by the bleeper will increase as background
noise increases.
IMPORTANT
DO NOT obstruct the reverse warning bleeper, as this
may effect the sound level emitted.
Daily, before starting to use the machine the reverse
warning bleeper MUST be tested to ensure its
operation.
There is no manual OFF switch provided and the
reverse warning bleeper must always sound when
reversing.
Hazard Warning
DO NOT use or continue to use the machine unless the
reverse warning bleeper is working.
DO NOT rely on the reverse bleeper sounding to ensure
that people move clear of the machine. Always check and
continue to look all around the machine with the visibility
aids supplied.
DO NOT allow the machine to roll back without selecting
reverse gear, as the bleeper will not sound.
To Next Page
Loading...
General