Instruction & Maintenance Manual Sheet 1.24
Phoenix ‘SPC10e’ Self Propelled Metering Chipping Spreader 03/12
A new operator should adjust the seat and column to their
individual comfort and to ensure that all controls are easily at
hand without, particularly ensuring the foot brake can be
reached in an emergency.
IMPORTANT
Ensure the column is locked and secure BEFORE
moving off.
DO NOT attempt to adjust the column with the
machine in motion.
The cab floor, either side of the centre is glazed with Perspex to
allow the centre spread feedroller to be visible. The Perspex
panels are hinged and a square key is provided to allow them to
be opened for cleaning.
To Next Page
Loading...
General