What code do I enter when pairing my Phonak Hearing Aid via Bluetooth?
When your device prompts for a code during the initial Bluetooth pairing with your ComPilot Air II, enter "0000" (four zeros).
Why is my Phonak ComPilot Air II Hearing Aid not connecting to Bluetooth?
If your Phonak Hearing Aid ComPilot Air II isn't recognized by devices it was previously paired with, it might be due to key-press tones being enabled on your phone. Deactivate these tones. If that doesn't work: * Switch ComPilot Air II off and then on again. * Ensure the devices are within 1 meter of each other and try again.
General| Category | Hearing Aid Accessory |
|---|---|
| Bluetooth Connectivity | Yes |
| Water Resistance | IP54 |
| Type | Streamer |
| Compatibility | Phonak hearing aids |
| Charging Time | 2 hours |
Procedure for charging the ComPilot Air II battery, including indicator light status.
Explanation of how the ComPilot Air II facilitates phone calls between the phone and hearing aids.
Step-by-step guide for pairing the ComPilot Air II with a Bluetooth-enabled phone.
Instructions on how to establish a connection after initial pairing.
Procedure for initiating a phone call using the ComPilot Air II.
How to answer or reject an incoming phone call via the ComPilot Air II.
How to stream audio wirelessly from cell phones and other Bluetooth devices.
Instructions for streaming audio from a television, recommending the TVLink II accessory.
Explanation of the various states and meanings of the indicator lights on the ComPilot Air II.
To Next Page
