Phonak Roger Select User Manual

17
Connect status lights
After pressing the Connect button, the following feedback
may be given by the back indicator light:
Connecting
Connection was successful – your Roger receiver is
connected to your Roger microphone.
Your Roger microphone could not nd a Roger receiver.
Move the devices closer to your Roger receiver and
make sure the Roger receiver is powered on. Then try to
connect again.
The Roger receiver is not compatible with your
Roger microphone.
You can connect an unlimited number of Roger
receivers to your Roger microphone, simply repeat
step 2 and 3 for any other Roger receiver.

Phonak Roger Select Specifications

General

Battery Life	Up to 8 hours
Operating Range	Up to 20 meters
Compatibility	Roger receivers
Frequency Range	2.4 GHz
Water Resistance	IP54
Charging Time	3 hours