Need help?Do you have a question about the Phonic MAX 2500 plus and is the answer not in the manual?
General| Output Power (8 ohms stereo) | 500W |
|---|---|
| Output Power (4 ohms stereo) | 750W |
| Output Power (2 ohms stereo) | 1250W |
| Output Power (8 ohms bridged) | 1500W |
| Output Power (4 ohms bridged) | 2500W |
| Signal-to-Noise Ratio | >100dB |
| THD | <0.03% |
| Cooling | Variable speed fan |
| Connectors (Inputs) | XLR and 1/4" TRS |
| Connectors (Outputs) | Binding posts and Speakon |
| Frequency Response | 20Hz - 20kHz |
| Input Sensitivity | 0.775V |
| Input Impedance | 20k ohms (balanced), 10k ohms (unbalanced) |
| Protection | Short circuit, thermal |
| Damping Factor | >300 |
Overview of the MAX series power amplifier and its design philosophy.
Highlights key specifications and capabilities of the MAX series power amplifier.
Initial setup steps and important checks before powering on the amplifier.
Guidance on mounting the unit in a standard 19-inch rack for optimal performance.
Describes how to connect audio sources using XLR or 1/4" TRS jacks.
Explains loudspeaker connections via binding posts and speakon connectors.
Details on power switch, LEDs (Power, Peak, Signal), and gain controls.
Explanation of grounding switch and operating mode selection.
Describes how to connect a single signal source to both channels for mono operation.
Explains independent channel operation for left/right stereo or bi-amplification.
Information on obtaining replacement parts, service, and repairs from distributors.
Details on the product warranty coverage, terms, and conditions.
Guidance on accessing online resources for FAQs, tech tips, and downloads.
To Next Page
