dual mono signal, where each individual mono signal of the input channels is sent to the corresponding outputs.
When the mono button is pushed in, adjusting the balance control of a stereo channel all the way to, say, the right
will allow users to combine the stereo signal of those inputs, to be output solely through the Main R output of the
mixer.
36. Main L/R Control
This 60 mm fader is nal level control for the main left and right audio feed, sent to the Main L and R output.
Application
On the following couple of pages you will nd a wide range of possible uses for the MU1002X mixer. Of course
Live Event
Additional Mixer To A PA System
To Next Page
Loading...
