INTRODUCTION
Congratulations on your purchase of the Phonic MU1002X
- a uniquely compact 10-input mixer, with two balanced
mic/line channels as well as four stereo line channels
combined to make the perfect mixer for almost any need.
Incorporating many features of the popular MU series of
compact mixers, the MU1002X goes further to include
a 16-program Digital Effect Processor, incorporating an
extraordinary 24/32-bit DSP. Featuring full gain ranges,
low distortion and an incredibly wide dynamic range, the
MU1002X is bound to make an impression.
We know how eager you are to get started – wanting
to get the mixer out and hook it all up is probably your
number one priority right now – but before you do, we
strongly urge you to take a look through this manual.
Inside, you will nd important facts and gures on the
set up, use and applications of your brand new mixer. If
you do happen to be one of the many people who atly
refuse to read user manuals, then we just urge you to at
least glance at the Instant Setup section. After glancing
at or reading through the manual (we applaud you if you
do read the entire manual), please store it in a place
that is easy for you to nd, because chances are there’s
something you missed the rst time around.
FEATURES
• DFX, our 24/32-bit DSP processing multi-
effect processor with 16 programs plus one
main parameter control, tap control and foot
switch jacks
• Two balanced Mic/Line channels each with
Peak indicators
• Four stereo Line channels each with +4/-10
level matching
• 3-band EQ on Mic/Line input channel
• 75 Hz low-cut lter on mono channels
• EFX sends per channel
• Mini Stereo I/O and stereo RCA I/O
• +48V phantom power on Mic channels
• Stereo EFX send cue for monitoring
individual channel
• Mono button on master output allows users
to select a stereo or dual mono output
• Balanced master output with 60 mm fader
control
To Next Page
Loading...
