Phyhome FHL104C - ONT Remote Restart; ONT Multicast Configuration; Encryption and FEC Switches

www.phyhome.com FHL104C User Manual
32
ONT Ethernet port VLAN configuration support configuration VLAN mode and
VLANID.
VLAN mode is commonly used in TAG mode and TRUNK mode.
Host(config-onu-1/1:1)#ethernet-port 1 vlan-mode tag
Host(config-onu-1/1:1)#ethernet-port 1 vlan-tag vid 10 ------vlan tag
model
Host(config-onu-1/1:1)#ethernet-port 2 vlan-trunk -------vlan trunk model
Host(config-onu-1/1:1)#ethernet-port 2 vlan-trunk vid 20
4.2.7 ONT remote restart
Type the reboot command in ONT mode to restart the ONT.
Host(config-onu-1/1:1)# reboot
4.2.8 ONT multicast configuration
Support ONT multicast mode, multicast fast leave setting and multicast VLAN.
Host(config-onu-1/1:1)#mcast-work-mode snooping ----multicast mode is
snooping
Host(config-onu-1/1:1)#mcast-leave-mode fast ----- fast leave Configuration
Host(config-onu-1/1:1)#ethernet-port 1 mcast-vlan 100 ----Configuration
multicast VLAN100
Host(config-onu-1/1:1)#ethernet-port 1 mcast-vlan not-strip-vlan ----no
mcast-vlan multicast VLAN
4.2.9 Encryption and FEC switches.
ONT encryption Configuration and FEC switches
Host(config-onu-1/1:1)#encrypt-ctrl
Host(config-onu-1/1:1)# fec-ctrl