13. user management
13.1 User add
Users of FHL104C are divided into the root, admin and guest, root own all
authority, admin hold operator management authority, guest can only query, may
not modify. System has three user default, root/root admin / admin. guest/guest.
These three users can not be deleted.
Users must select a user group for admin or guest.
Host(config)# user test group admin password 1234--- - add test user, role for
admin
Host(config)# user abcd group guest password 1234 ------- add abcd user, role for
guest
13.2 User query
Type show user-info command to view all user information in Config mode ,
Host(config)# show user-info
13.3 User delete
Delete a user:
Host(config)# no user test
14. System upgrade and backup
14.1 Introduction to system upgrade
FHL104C OLT equipment support system software upgrade.FHL104C system
contains the service function modules: SCU main control module and PON
service module, at present two modules of the program are packaged into a file,
just start serial boot command line to upgrade, or remote FTP upgrade mode
upgrade. Upgrade steps is divided into three steps: first to download program files
to the ramdisk and upgrade file in ramdisk to each sub module, finally restart the
system can successfully upgraded software system. Note in front of the download
will Shall ensure that FHL104C management channel and the FTP server is
connected, you can use the ping command for diagnosis. In the download must
also pay attention to check the server of FTP service is open, user name and
To Next Page