upgrade os file name
filename: file name after download to the device
------------------------------------------------------------------------------------------------------------
software upgrades please check the software version and the time before
the operation, once the wrong program may upgrade
Causes the system unable to start.
------------------------------------------------------------------------------------------------------------
Restart system:
Reboot
Upgrade APP software.
Host(config)# ftp download 192.168.0.198 1 1 FHL104CV100R002
Host(config)# update os FHL104CV100R002
Host(config)# reboot
Description: to upgrade to boot, you need through the console port local
upgrading, upgrading boot version, please contact technical support staff. To
restore the factory configuration, equipment after the restart to configure
according to the startup-config loading.
14.3 Configuration file backup and load
14.3.1 Configuration file backup
FHL104C configuration divided into start and run configurations two. Boot
configuration is also called system startup when loading the configuration file, file
name is startup.cfg, run configuration, is after the successful launch of the system,
running configuration, operation users can continue to update the run
configuration, and finally performs the write command, run the configure to write
to the boot configuration and keep to flash. Run configuration file name for the
running.cfg.FHL104C support will launch configuration, the run configuration
backup to the host server. Backup before to ensure normal FTP server
To Next Page