5.QINQ service description and configuration
5.1QinQ service Introduction
FHL104C use service templates to define the service model, namely QinQ profile.
In QinQ template can create up to 32 rule, each rule defines a service model.
Such as VLAN transparent transmission, VLAN switch, and a VLAN tag add is
QinQ business.
After binding the QINQ template to the PON port, the PON port will use the
service model defined in the QINQ template.
QINQ template configuration process, each rule can not conflict. The back of the
rule rule can cover the front, but the configuration of the rule will not come into
effect.
5.2QinQ service configuration
Create a QINQ template that defines a QINQ service model:
Host(config)# qinq-profile 10
To Next Page