Please use this operation carefully in the current use.
15.SNMP configuration
FHL104C provides MIB interface, can be through the NMS equipment
management and maintenance.
Before the OLT is managed by the gateway, the SNMP parameters are required to
be configured on the OLT.
Group name:
OLT has the default SNMP group name public and private, if the user uses the
default group name, the project is not configured. Otherwise, it is configured by
the following command:
Host(config)# snmp community abctest ro
Host(config)# snmp community testabc rw
TRAP server
The Trap server needs to be configured manually, and the port is not configured
by default when using 162:
Host(config)# snmp trap-server 192.168.1.100 v2
To Previous Page