EasyManuals Logo
Home>PICO>Test Equipment>PicoScope 3204A

PICO PicoScope 3204A Programmer's Guide

PICO PicoScope 3204A
144 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #129 background imageLoading...
Page #129 background image
PicoScope 3000A Series Prog rammer's Guide 123
Copyright © 2011-2013 Pico Technology Limited. All rights reserved. ps3000abpg.en r9
53
PICO_CONFIG_FAIL_AWG
Unable to configure the signal generator
54
PICO_INITIALISE_FPGA
The FPGA cannot be initialized, so unit cannot be opened
56
PICO_EXTERNAL_FREQUENCY_INVALID
The frequency for the external clock is not within ±5% of the stated value
57
PICO_CLOCK_CHANGE_ERROR
The FPGA could not lock the clock signal
58
PICO_TRIGGER_AND_EXTERNAL_CLOCK_CLASH
You are trying to configure the AUX input as both a trigger and a reference
clock
59
PICO_PWQ_AND_EXTERNAL_CLOCK_CLASH
You are trying to congfigure the AUX input as both a pulse width qualifier and
a reference clock
5A
PICO_UNABLE_TO_OPEN_SCALING_FILE
The scaling file set can not be opened.
5B
PICO_MEMORY_CLOCK_FREQUENCY
The frequency of the memory is reporting incorrectly.
5C
PICO_I2C_NOT_RESPONDING
The I2C that is being actioned is not responding to requests.
5D
PICO_NO_CAPTURES_AVAILABLE
There are no captures available and therefore no data can be returned.
5E
PICO_NOT_USED_IN_THIS_CAPTURE_MODE
The capture mode the device is currently running in does not support the
current request.
103
PICO_GET_DATA_ACTIVE
Reserved
104
PICO_IP_NETWORKED
The device is currently connected via the IP Network socket and thus the call
made is not supported.
105
PICO_INVALID_IP_ADDRESS
An IP address that is not correct has been passed to the driver.
106
PICO_IPSOCKET_FAILED
The IP socket has failed.
107
PICO_IPSOCKET_TIMEDOUT
The IP socket has timed out.
108
PICO_SETTINGS_FAILED
The settings requested have failed to be set.
109
PICO_NETWORK_FAILED
The network connection has failed.
10A
PICO_WS2_32_DLL_NOT_LOADED
Unable to load the WS2 dll.
10B
PICO_INVALID_IP_PORT
The IP port is invalid
10C
PICO_COUPLING_NOT_SUPPORTED
The type of coupling requested is not supported on the opened device.
10D
PICO_BANDWIDTH_NOT_SUPPORTED
Bandwidth limit is not supported on the opened device.
10E
PICO_INVALID_BANDWIDTH
The value requested for the bandwidth limit is out of range.
10F
PICO_AWG_NOT_SUPPORTED
The arbitrary waveform generator is not supported by the opened device.
110
PICO_ETS_NOT_RUNNING

Table of Contents

Other manuals for PICO PicoScope 3204A

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the PICO PicoScope 3204A and is the answer not in the manual?

PICO PicoScope 3204A Specifications

General IconGeneral
BrandPICO
ModelPicoScope 3204A
CategoryTest Equipment
LanguageEnglish

Related product manuals