PNOZ e1vp
Operating Manual PNOZ e1vp
21236-EN-06
35
Safety characteristic data
NOTICE
You must comply with the safety-related characteristic data in order to
achieve the required safety level for your plant/machine.
Operating
Mode
EN ISO
13849-1:
2015
PL
EN ISO
13849-1:
2015
Category
EN 62061
SIL CL
EN 62061
PFH
D
[1/h]
IEC 61511
SIL
IEC 61511
PFD
EN ISO
13849-1:
2015
T
M
[year]
SC output
via logic in-
put PL e Cat. 4 SIL CL 3 3,61E-09 SIL 3 5,82E-05 20
SC output
via 2-ch. in-
put circuit PL e Cat. 4 SIL CL 3 3,44E-09 SIL 3 4,53E-05 20
All the units used within a safety function must be considered when calculating the safety
characteristic data.
INFORMATION
A safety function's SIL/PL values are not identical to the SIL/PL values of
the units that are used and may be different. We recommend that you use
the PAScal software tool to calculate the safety function's SIL/PL values.
Remove plug-in terminals
Procedure: Insert the screwdriver into the housing recess behind the terminal and lever the
terminal out.
Do not remove the terminals by pulling the cables!
To Next Page
Loading...
Need help?
General
