EasyManuals Logo

Pilz PNOZ e1vp User Manual

Pilz PNOZ e1vp
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
PNOZ e1vp
Operating Manual PNOZ e1vp
21236-EN-06
7
Use of qualified personnel
The products may only be assembled, installed, programmed, commissioned, operated,
maintained and decommissioned by competent persons.
A competent person is a qualified and knowledgeable person who, because of their train-
ing, experience and current professional activity, has the specialist knowledge required. To
be able to inspect, assess and operate devices, systems and machines, the person has to
be informed of the state of the art and the applicable national, European and international
laws, directives and standards.
It is the company’s responsibility only to employ personnel who
} Are familiar with the basic regulations concerning health and safety / accident preven-
tion,
} Have read and understood the information provided in this description under "Safety"
} Have a good knowledge of the generic and specialist standards applicable to the spe-
cific application.
Warranty and liability
All claims to warranty and liability will be rendered invalid if
} The product was used contrary to the purpose for which it is intended
} Damage can be attributed to not having followed the guidelines in the manual
} Operating personnel are not suitably qualified
} Any type of modification has been made (e.g. exchanging components on the PCB
boards, soldering work etc.).
Disposal
} In safety-related applications, please comply with the mission time T
M
in the safety-re-
lated characteristic data.
} When decommissioning, please comply with local regulations regarding the disposal of
electronic devices (e.g. Electrical and Electronic Equipment Act).
Unit features
} Outputs using semiconductor technology:
1 safety output, either instantaneous or delayed
1 safety output, delayed
1 auxiliary output
2 test pulse outputs
} Connection options:
E-STOP pushbuttons
Safety gate limit switches
Start button
Proximity switch
} To process signals from output signal switching devices (OSSDs) on light grids
} Selectable delay time

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pilz PNOZ e1vp and is the answer not in the manual?

Pilz PNOZ e1vp Specifications

General IconGeneral
BrandPilz
ModelPNOZ e1vp
CategoryRelays
LanguageEnglish

Related product manuals