PNOZ s2
Operating Manual PNOZ s2
21394-EN-11
| 14
NOTICE
In the event of an automatic start or manual start with bridged start
contact (fault):
The unit starts up automatically when the safeguard is reset, e.g. when the
E-STOP pushbutton is released. Use external circuit measures to prevent
an unexpected restart.
Semiconductor output
*Connect together the 0V connections on all the external power supplies
INFORMATION
If a base unit and a contact expansion module from the PNOZsigma range
are connected via the connector, no additional wiring is necessary.
To Next Page
Loading...
