Pilz PNOZ s3 Series - Technical Details; General and Electrical Specifications

PNOZ s3
Operating Manual PNOZ s3
21395-EN-10
12
Technical Details
General 750103 751103
Approvals CCC, CE, GOST, KOSHA, TÜV,
cULus Listed
CCC, CE, GOST, KOSHA, TÜV,
cULus Listed
Electrical data 750103 751103
Supply voltage
Voltage 24 V 24 V
Type DC DC
Voltage tolerance -15 %/+10 % -15 %/+10 %
Output of external power supply
(DC)
2,5 W 2,5 W
Residual ripple DC 20 % 20 %
Continuous duty 100 % 100 %
Max. inrush current impulse
A1 0,50 A 0,50 A
Pulse duration 5,0000 ms 5,0000 ms
Reset circuit 0,20 A 0,20 A
Feedback loop 0,20 A 0,20 A
Max. overall cable resistance Rl-
max
Single-channel at UB DC 30 Ohm 30 Ohm
Dual-channel without detection
of shorts across contacts at UB
DC
60 Ohm 60 Ohm
Dual-channel with detection of
shorts across contacts at UB DC
30 Ohm 30 Ohm
Min. input resistance at power-on 110 Ohm 110 Ohm
Voltage at
Input circuit DC 24,0 V 24,0 V
Reset circuit DC 24,0 V 24,0 V
Feedback loop DC 24,0 V 24,0 V
Current at
Input circuit DC 50,0 mA 50,0 mA
Reset circuit DC 50,0 mA 50,0 mA
Feedback loop 50,0 mA 50,0 mA
Number of output contacts
Instantaneous safety contacts
(N/O)
2 2
Inputs 750103 751103
Number 2 2
Semiconductor outputs 750103 751103
Number 1 1
Voltage 24,0 V 24,0 V
Current 20 mA 20 mA